12V 500VA Victron Phoenix Full Sine Wave Inverter VE.Direct
Phoenix Inverters with VeDirect, (AC inverter only)
Ve.Direct port for communication with laptop or via a bluetooth dongle.
There are fully configurable low battery alarm trip and cut-off voltages with the respective resest levels.
Dynamic cut-off levels, load dependant.
AC Output voltage of between 210 - 245V, with a frequency of either 50Hz or 60Hz.
Monitoring of the DC input and AC output voltages, Percentage load and all alarms.
> High power start up ability for power converters, electric tools and halogen lamps.
> Eco mode for low consuming loads (min. 15W).
> Remote on/off switch can be connected for remote control.
The unit is available with different output sockets, Shuko, UK, AU/NZ and IEC
Screw terminal DC connections.
Specifications:
12V 500VA Full Sine Wave Inverter
Weight: 3.9 kg
Dimensions: 8.6 × 17.2 × 27.5 cm
Manufacturer: Victron
Type: Full Sine Wave Inverter
Continuous Power: 400W
DC Voltage: 12V
Voltage Range: 9.2~17VDC
No Load Current Draw: 0.5A
DC Connector: Cable
Efficiency: >89%
Warranty: 5 Years
