In stage 4 and above, lead acid batteries are being used outside of their design parameters. This is due to long and frequent power outages resulting in multiple battery cycles per day. The short periods between load shedding cycles is also insufficient to recharge the battery correctly. It is for this reason that no lead acid battery warranty in if the loadshedding increases to stage 4 or above. Warranty will only be given on the built in battery if a 160W solar panel gets installed on the Power Trolley.
Overview & Features
Tackle load shedding with the Mecer 2Kw 24V 2x100A Battery Pure Sine Wave Inverter + 800W Solar Charge Controller. Easy to move around your home or office. Includes two SA socket outlets for your TV, DSTV, DVD player, Laptop, ADSL/Fibre router.
It is recommended that the inverter NOT be used to power any heating elements (kettle, microwave) as this will place excessive load on the battery and thereby shorten the life span of the battery.
Features:
Mecer 2Kw 24V 2x100A Bat Pure Sine Wave includes 800W Solar charge controller – SOL-I-BB-M2
PRODUCT OVERVIEW
The product applies to diversified loads because its digital design, pure sine wave output and excellent over current protection can withstand the loads with a large starting current; the product is provided with independent solar three-stage charge management to improve charge efficiency of its battery and realize a longer life; the product provides universal 5VDC USB output port and 12VDC output to be widely applied to small solar power generation occasions including families, schools, street monitoring, forest monitoring, industrial and mining enterprises, frontier defense, sea islands, pasturing areas, etc.
MAIN FEATURES
• Excellent performance because of an MCU intelligent control technology;
• A wide range of applicable loads because of pure sine wave AC output;
• Convenient and practical 5VDC USB output port and 12VDC output port;
• Solar array and battery connrnon-anode system input;
• Charge by mains supply for flexible configuration (optional function);
• Overcharge protection and over discharge protection for a longer battery life;
• LCD and LED'S for visualization of operation status of the equipment
• Overall automatic protection and alarms Including
AC output over load protection, short circuit protection ,etc .
Product Information
1. AC Output
2. AC Input
3. Smart Cooling Fan
4. Solar PV Input
5. Battery Extension
6. Battery Switch
7. LED Indicator
8.LCD Display
9. Function Buttons
10.0N/OFF Buttons
11.5VDC Output
12. 12VDC Output
13.DC Output Switch
Approximate Back-up Time Table
***The above table is a rough estimate only, and does not guarantee any run-down times offered! Please do not consider these times as fact. Due to the nature of these technologies, including but not limited to the type and quality of batteries used, power draw from connected devices, load fluctuation, etc. no fully accurate times can be offered.
