Inverter DC Distribution Board Lightning Protection and Fuses with DC Switch
The Power Board consist of the following
Surface Mount 12Way DC DB board to the inverter. The complete DC DB board distribute the incoming PV Power (Input) from the Solar Panels into a Double Pole Fuse holder and Lightning Protection unit. From the Fuse disconnection and Lightning Protection we installed a Double Pole DC breaker to disconnect the incoming PV power to the inverter safely. 2IN 2OUT (80-450VDC) for 2 MPPT Inverters
Inputs and Outputs This unit combines 2 PV input pairs into 2 DC outputs. There is no gland installed for cable input,cable output for for earthing.
Dedicated terminals are installed inside Pre-Wired DC DB board for PV+ ,PV- and Earthing
2 x DC isolation: rated at 16A and 600V
2 x 2 DC Isolation: rated 2 Pole Fuse holders and 2 x 20A 10x38A fuses 1000V
2 x DC surge protection
This unit has 2 x Growcol DC surge/lightning arrestors included and is suitable for installation sites that experience less frequent lightning strikes. Availability These boxes are made to order and require an average lead-time of a few working days if no stock is available.
